Today, we'll show you how to clean a Neutrik opticalCON connector. This connector is important for fiber optic cables. Sometimes, you need to take it apart to clean it. Be careful not to damage the cables by holding the cable with your fingers to prevent movement. There's a lock washer holding it together. Release the tension, spin the boot about six times, and remove the front shell. Clean the fibers with a wet to dry wipe, and use canned air for the shell. To put it back, align the tab and slot, screw it on, and make sure it clicks. Now, you have a clean and working Neutrik opticalCON cable. For more tips, visit www.camplex.com.