We are having phone issues. Until further notice,
please use the following phone numbers: Main/Sales: 620-342-7743
Tech Support: 620-342-7744 Thanks!
The Camplex Team
HD COMPONENT 720P/1080I/480P
NTSC/PAL VIDEO COMPOSITE
SIGNAL PERFORMANCE
CHANNEL BANDWIDTH: +50 MHz
DIFFERENTIAL GAIN: less than +/- 1 %
DIFFERENTIAL PHASE: less than +/- 1 degree
SIGNAL TO NOISE RATIO: better than 56 dB
PROGRAM AUDIO SIGNAL PERFOMANCE
OUTPUT LEVEL:
600 Ohm (Variable from -10 to 0 dBm)
BANDWIDTH: 20 Hz to 20 kHz, better than +1/-2 dB
DISTORTION (THD): Less than 2%
HEADROOM: 10 dB
DYNAMIC RANGE: 80 dB (noise floor to peak clip)
SIGNAL TO NOISE RATION: better than 60 dB
ALL SIGNALS & POWER VIA (1) CAT-5 CABLE
Signals by Direction:
From Remote Camera Adapter to Control Unit
• Camera Video SD/HD Component
• Camera Video SD Composite
• Intercom to Control Unit w/Headset
• Camera/Program Audio (1 Channel)
From Control Unit to Remote Camera Adapter
• 7.2 vdc to 8.4 vdc Operating Power for Camera nominally performing up to 600’ (Depending on current demand of camcorder and type of Cat-5 cable used)
• Intercom to Camera Adapter w/Headset
• Tally lights camera adapter front, rear, and side
