We are having phone issues. Until further notice,
please use the following phone numbers: Main/Sales: 620-342-7743
Tech Support: 620-342-7744 Thanks!
The Camplex Team
In addition to the standard features and options for the CP-301C, Camplex now offers an HD/SD SDI option using a single mode fiber combined with the coax cable. For cameras equipped with either SMPTE 292 HD or SMPTE 259 SD, a single BNC cable brings the
SDI output from the camera to the Camplex camera adapter. Inside the camera adapter the signal is converted to light via a laser diode, travels the length of the fiber and is converted back to an electronic signal via a photo diode at the control end.
There is filely no signal degradation or lag incurred in this process. At the control end Camplex provides two SDI outputs for connecting to a switcher and monitors. Camplex has worked closely with the cable manufacturer to provide this hybrid cable that mates the coax and fiber into one clean rugged package. Camplex continues to provide innovation in motion by offering high performance
low cost solutions for today's challenges.
HD-SDI-31 added to the CP-301C allows the camera HD-SDI or
SD-SDI output converted to single mode fiber transmission.
Meets or exceeds SMTPE 259M SD,
and 292M HD standards.
HD-SDI-31 option requires a single mode fiber cable in addition to the coax required for the CP-301C system.
HD-SDI-31 can also be added to the previous
Camplex model CP-301B (factory upgrade only).
