We are having phone issues. Until further notice,
please use the following phone numbers: Main/Sales: 620-342-7743
Tech Support: 620-342-7744 Thanks!
The Camplex Team
PSA-31 Camplex Power Surge Absorber for CP-301B/PDC-340B System - Provides additional startup current for DVCPro camcorders, in many cases eliminating the need for
a battery on the camcorder.
PSA-71 Camplex Power Surge Absorber for CP-701 OPT-7-2 System - Provides additional startup current for DVCPro camcorders & HD cameras, in many cases eliminating
the need for a battery on the camcorder.
CAB-23 Camplex Anton-Bauer Snap-On® Docking Adapter - Allows quick and easy docking
of the Camplex Camera adapter to cameras equipped with Anton-Bauer's various
battery mounts.
CMD-25 Camplex Mechanical Docking Adapter - Used with the various DAP-23 Camera Adapter Docking Plates (above) or directly on the Sony NP-1 Battery Case, this adapter allows
the user to mount their Camplex camera adapter onto the camera. Captive thumbscrews provide convenient removal of the Camplex camera adapter when it's time to place the camera inside its case.
CPN-2578 Panasonic/Philips Mechanical Docking Adapter for AJ-D700/800/900-series Camcorders - Allows parallel operation of Camplex power with a battery to absorb the high instantaneous current demands typical of these cameras at startup. Batteries may be removed/exchanged without removing the Camplex camera adapter. This adapter also allows operation of the camcorder VCR in many configurations - The battery provides additional power during high-current "events," such as solenoid or motor start-up.
CSR-23 Camplex Cable Strain Relief System - For use with all Camplex docking systems,
this strain relief clamp provides cable support and prevents excessive pressure on
the camera adapter multiplex connector. Slots are provided for RG-6 and RG-59
diameter cables. The CSR-23 is included with all new systems, and is available
for earlier Camplex systems as an purchased accessory.
DAP-23 Camera Adapter Docking Plates - Available for a wide variety of camera makes
and models. Requires a CMD-25 Mechanical Docking Adapter. Contact your sales
representative or Camplex Corporation for specific camera/VCR docking
and interface configurations.
Camera Adapter Interface Cables A wide range of Camera Adapter Interface Cables are available from Camplex.
These cables allow direct connection of your camera/camera adapter to the
Camplex CP-601 or CP-301B camera adapter box. Contact Camplex
Corporation for additional information.
Plus Port Interface Cables Camplex Corporation has a huge variety of cables already designed for
CCU/RCU interface to CP-301B and CP-501/601 systems equipped with
the PP-150 Plus Port® Data Interface System. Contact your sales
representative or Camplex for additional information/pricing.
BP-20 Blank Panel Available to fill unused spaces in the RM-20 Rack Mount Adapter. May also
be used to mount an external PP-150 or PP-A2X control unit box in the rack
RM-20 Rack Mount Adapter "Tray-style" rack mount allows up to three Camplex CP-301B-series control
units, in any combination, to be mounted in a single 19 inch (48.25 cm)
rack unit space (1 RU).
RM-KIT Rack Mount slide kit (used with RM-20) which allows easy slide access to the
Camplex control units. Requires the RM-20 Rack Mount for CP-301B-series products.
RM-PP A single RU panel which will hold up to three external PP-150 Data Interface
control units. May also be used with the PP-A2X Second Audio Channel option
control unit boxes for convenient rack mounting.
Camplex Triax Adapters TRX-25-U-KIT Camplex Triax Adapters are available in US standards for various configurations, allowing the user to utilize existing triax cables. Please contact Camplex
Corporation for additional information.
